Seat cover, black synthetic leather material Aprilia SR 50 1997=>  

This well fitting two piece (driver and passenger) seat cover is cut and sewed accurately in order to replace the original seat cover of your scooter. Hard-wearing synthetic leather material and sealed stitching ensure long life and protect from water ingress into the seat. To mount the cover you can use the original seat body and cushion. Only glue and staples will be needed in addition to a saddlers help or personal skills. Fits Aprilia SR 50 from 1997 e.g. SR 50 www, sport, netscaper, SR2000, ditech, stealth etc.

How to do it:

1. remove the old seat cover
2. ensure seat body and cushion are in good condition
3. clean seat body and cushion, remove previous bonding 
4. place cusion an new cover accurately
5. position the cover correctly and smooth starting from the front end 
6. apply some glue to the rim of cover and seat body
7. fit the seat cover to front end, back end and to the sides slightly stretching the material
8. make sure to proceed to work symmetrically and mind wrinkles
9. When the cover is seated and glued corretly it should be fixed to the seat body with a staple gun (if plastic seat body)